Category：Full automatic positive pressure thermoforming mac；Model：RJD-600*720 LX-3
RJD-515×580LX-3型/600*720LX-3型?wired plastic pneumatic Thermoforming unit is an integrated design of machine, electricity, gas, and adopts PLC programmable control system, microcomputer control, and the same feeding manipulator stacking, human-machine interface operation. The product is completed by four stations of sheet feeding, heating, forming, trimming, and stacking. It is a plastic sheet forming equipment with simple operation, low power consumption, fast speed, and labor saving. It has manual, semi-automatic Three fully automatic operation functions. The general product cycle is between 2 and 6 seconds.
?RD600x720 thermoforming machine is a combination of mechanical ,electric and pneumatic components, and the whole system was cotrolled by micro PLC, which can be operated in man-interface.?It has three operatio models:`manual .seml-automatic , normal working speed around 2-6second/cycle.
|
Models
|
RJD-515×580LX-3型 |
RJD-600×720LX-3型 |
|
Maximum molding area |
515×580mm |
600×700mm |
|
Maximum forming height |
100mm |
120mm |
|
Sheet thickness range |
0.1-1mm |
0.1-1mm |
|
Maximum roll diameter |
710mm |
1000mm |
|
Air flow |
2.5m3/min |
2.5m3/min |
|
Heating plate power |
15Kw |
18Kw |
|
Formwork heater power |
4.8Kw |
6Kw |
|
Air pressure |
0..8Mpa |
0..8Mpa |
|
Water consumption |
10(Liters/min)(10-20°C) |
10(Liters/min)(10-20°C) |
|
Power source |
3-NAC380V±1.5V |
3-NAC380V±1.5V |
|
Production rate |
480-1500(Cycles/hr) |
480-1500(Cycles/hr) |
|
Overall dimensions of equipment |
(L)9000*(W)1550*(H)2600 |
(L)9000*(W)1550*(H)2600 |
|
Equipment weight |
4300Kg |
4500Kg |
|
Maximum atmospheric discharge |
2m3 |
2.5m3 |
